CNC Steel Bar Stirrup Bending Machine Operating Procedure
1. Before starting Steel Bar Stirrup Bending Machine, add lubricating oil according to the instructions on the lubrication sign, and then check whether the power supply and the connection of all mechanical parts are firm, and ensure that there are no abnormalities before starting production.
2. After turning on the machine, check whether the air circuit is normal and whether the pressure gauges indicate whether the pressure is within the specified range.
3. The inspection door and electric control box door should be closed during normal production.
4. The steel bars processed must comply with the diameter specified by the equipment. When processing large-sized steel bars, the speed must be slowed down.
5. Do not stand directly in front of or under the door when opening and closing the inspection door with a cylinder.
6. When the machine is running, it should be kept away from the cutter position. It is strictly forbidden to contact the steel bars being processed and the moving parts of the machine. People are not allowed to stand in front of the machine when discharging materials.
7. Do not squeeze or pull the cable with excessive force to avoid electric leakage, injury or fire.
8. In case of emergency, please press the emergency stop, troubleshoot the fault, and then resume after confirming safety.
9. Do not modify the electrical control system and mechanical structure without authorization
10. After the operation is completed, shut down the machine, disconnect the power supply, and clean up the site.
