RB-32 Electric Portable Rebar Bender Machine is an essential tool for builders, contractors, and manufacturers who need accurate and efficient rebar bending. This machine is perfect for both on-site and workshop use, offering a range of features that enhance performance and user comfort.

Model	RB-32
Power Consumption	3000 W
Input Voltage	AC  220V/110V
Rated Current	18 A / 26 A
Bending Capacity	32MM
Bending speed	6-7 S
Stardard Euquipmet	Tool Kit, Metal case
Motor	Single-phase 220V/110V ,  50/60 HZ
Cord length	2.5 M
Net weight	175 KG
Gross weight	203 KG
Machine size	600mm×580mm×470mm
Packing size	650mm×650mm×730mm

One of its standout features is the preset angle locks, which allow you to set specific angles for repeatable bends. This makes the bending process quicker and more accurate. Additionally, the machine is equipped with two slide-type angle selectors, enabling precise bends at any angle between 0 and 180 degrees.

RB32 Portable Rebar Bender includes two standard foot pedal switches for hands-free operation, making the bending process more comfortable and efficient. It also comes with various rollers and collars to accommodate different rebar diameters, providing flexibility for various bending tasks.

Safety is a key focus with this machine. Its automated bending process helps reduce the risk of injury and fatigue associated with manual bending. The machine also features emergency stop and flush-mounted star buttons to ensure safe operation. The motor runs quietly and only when needed, minimizing noise and reducing wear and tear.

3-5 Seconds Bending Speed

The rebar bender bends 1/4″ to 1″ (6 to 25mm) steel super fast in 3-5 seconds. Bending Angle: 0-180°. The bending speed depends on the thickness of the rebar and the angle you want to achieve. Maximum rebar diameter: 1″/25mm #8 Grade 60

Humanized Foot Pedal and Handle

The foot switch connected to point 1,2 will make it more convenient to go to work. And when the start switch or foot switch is pressed, the rebar will be bent to the angle you set. When moving the pipe bender by fixing the handle, you cannot loosen the 4 bolts, and then move the pipe bender together by the 4 handles.

Two Angle Adjusters

Adjust the angle you need by moving it to the left or right, and make sure the angle setting handle is fixed after the angle adjustment is accurately set. When you find some abnormalities during operation, you must press the emergency stop to shut down the operation of the machine.