The portable steel bar bending machine is used for bending steel bars in high-rise buildings, highways, railway foundation pile foundation steel cages and various building skeletons. It is suitable for on-site bending construction of pile foundation steel bars and pile head steel bars. Portable hydraulic steel bar bending is driven by the hydraulic system. The portable bending machine is small in size, light in weight and easy to operate. One person can complete the bending operation of on-site cast steel bars. However, the traditional bending method requires manual bending and welding in advance. , which is more labor-saving in comparison. It not only increases accuracy and reduces labor intensity, but also greatly improves the safety factor and improves work efficiency.

Product Features of Portable Steel Bar Bending Machine

1) The overall structure is simple and easy to operate. Good stability and high reliability, increase the quality of steel bar bending and improve work efficiency;
2) Suitable for construction site operations such as parts that are difficult to reach with ordinary bending machines after steel bars are tied;
3) Driven by a high hydraulic system, it has a large bending force and can bend up to 40MM steel bars;
4) There is no need to replace the working head, and steel bar bending and straightening work can be performed. Bending and straightening speed are fast;
5) Easy operation reduces labor force, the product is easy to move, and the operation is simple and safe. Operation.

How to Use the Portable Steel Bar Bending Machine

1. This machine consists of a bending and straightening head, oil pipe and electric hydraulic pump.
2. Before use, check whether the oil pipe and oil meter are normal, then connect the quick connector to the quick connector on the bending and straightening head, and then put the steel bar smoothly into the front of the split bending machine module to ensure that the preparations are complete. ,
3. Turn on the switch. At this time, the oil pump starts to work. The output hydraulic oil increases to 63Mpa as the load increases. When the push shaft advances, the steel bar is bent, and the push shaft reaches the appropriate position.
4. Please visually check the bending angle to achieve the desired angle. When it is necessary to reduce the pressure, turn the manual valve handle. When the work is completed, unplug the power supply and remove the quick connector.