GHM MACHINERY

Home » Automatic Wire Bending Machine Operation
ghm-machinery-automatic-rebar-stirrup-bending-machine-11-1000x600

Automatic Wire Bending Machine Operation

Setting up and fine-tuning a fully Automatic Wire Bending Machine involves a structured process to ensure precise and efficient operation. This advanced equipment is essential for high-quality steel bar processing in construction projects of all scales. Here’s a step-by-step guide to help you through the setup:

SGW5-13 Automatic Rebar Bending Machine

1. Power Up

Start by activating the console’s power supply. This step initiates the machine’s control system, preparing it for operation.

2. Host Activation

Next, switch on the main power unit of the bending machine to activate its core functions. Ensure all power indicators are working properly before proceeding.

3. Cable Connection Check

Turn on the power switch and inspect the host cable connections to confirm the correct sequence. Ensure that the cutter is not blocking the steel bar outlet. If any misalignment is detected, adjust the wire ports for proper connection.

4. Wheel Adjustment

Use the remote control to tighten the large wheel, creating space for steel bar insertion. Once the steel bars are in place, release the large wheel, allowing the small wheel to automatically grip and secure the bars.

5. Feeding Mechanism Setup

Press the small wheel feeding button to guide the steel bar beneath the large wheel. Tighten the large wheel and feed the steel bar until it’s positioned correctly under the cutting knife. Make sure the alignment is accurate to avoid any misfeed issues.

6. Parameter Tuning

Set the return parameter using the designated knob. This allows you to configure the bending angle and other essential parameters. Fine-tune the settings as needed to achieve the desired bending precision.

7. Test Run

Perform a test run by processing a single steel bar. Utilize the built-in individual graphic modulation option to test the bending operation. Click the start button and closely monitor the bending performance to ensure it meets the required specifications.

8. Continuous Operation

Once the test run is successful, switch the machine to continuous operation mode. Adjust the knob to set up multiple stirrups or other repetitive shapes as needed. This mode ensures uninterrupted production for large-scale processing.

By carefully following these steps, you can effectively set up, debug, and operate a Automatic Wire Bending Machine. This structured approach guarantees precise steel bar bending, enhancing efficiency and productivity for your construction projects.

Scroll to Top